5K Repeater Controller
Detailed Specifications
Hardware | |
---|---|
Microprocessor | CMOS HD63B09 (MC6809-compatible). |
Memory | 8K Bytes non-volatile CMOS RAM; 16K Bytes CMOS EPROM. |
Real-Time Clock Calendar | Keeps time even with loss-of-power. |
DTMF Decoder | MT8870, full 16-digit, crystal controlled, shared by repeater and control receiver inputs. |
Repeater Receiver COR Input | NPN transistor with pullup, switchable active Hi/Lo. |
Control Receiver COR Input | NPN transistor with pullup, switchable active Hi/Lo. |
Repeater Transmitter PTT Output | Open-drain power MOSFET, switchable active Hi/Lo. |
CTCSS Decoder Input | NPN transistor with pullup, switchable active Hi/Lo. |
Repeater Receiver Audio Input | 70mV to 2V RMS In 2 ranges; level adjust pot. |
Control Receiver Audio Input | 70mV to 2V RMS In 2 ranges; level adjust pot. |
Repeater Transmitter Audio Output | 100mV to 1V RMS Into 600 ohms; 200mV to 2V RMS into 10K ohms; level adjust pot. |
CW/Tone Generator | Sine-wave synthesizer and shaper; level adjust pot. |
Logic Inputs (3) | NPN transistor with pullup. |
Logic Outputs (3) | Open-drain power MOSFET; 40V 100mA. |
Protective Circuits | Tranzorb suppressor and ferrite bead on power input; Transzorbs on all power MOSFETs; bypass capacitors on all external inputs and outputs. |
Power Requirements | 12 to 15VDC at 60mA; on-board voltage regulators. |
Connectors | DB-25S input/output connector; 2.5mm DC power jack. All mating connectors supplied. ICs in machined-pin sockets. |
PC Board | G10FR glass epoxy, double-sided with plated-thru holes, solder mask, silk-screened legends. |
Size | PC board measures 5-13/16" D x 6" W x 1/2" H without the mating DB-25P attached. |
Commands | |
---|---|
Clock/Calendar | Set Clock/Calendar; Adjust Daylight Savings Time; Include in messages; Keeps time during power-down; Automatic Leap Year Adjustment. |
Custom Tones | Set Frequency and Duration; Include in messages. |
CW | Disable/Enable; Set Frequency; Set Speed. |
DTMF | Disable/Enable Mute; Mute Delay; Interdigit time; Access Mode: Carrier / CTCSS / AND-CTCSS / OR-CTCSS / ANTI-CTCSS / no access. |
Identifier | Initial and normal callsigns; Interval; ID Tail Message; Force ID. IDer is polite (IDs during breaks). |
Logic Inputs | Name macro(s) to execute on either or both transitions. |
Logic Outputs | Force output to momentary or latched states. |
Macros | Create; Append; Erase; List; Rename. |
Messages | Initial ID; Normal ID; Tail; Courtesy; Pre-Timeout; Post-Timeout. |
Repeater Access | Carrier / CTCSS / AND-CTCSS / OR-CTCSS / ANTI-CTCSS / No Access. |
Security | Name Master and Control Operator Passwords; Select priviledge levels. |
Squelch/Repeater | Courtesy message and timer; Dropout message and timer; Activity monitor functions. |
Test Tone | Create test tones of programmable frequency and duration. |
Transmitter | Disable/enable transmitter; Key transmitter timed/untimed, Courtesy Delay, Courtesy Beep; Dropout Delay; Timeout Timer; Unkey Delay. |
Utilities | Miscellaneous helpful commands. |
©
Copyright 2002, S-COM, LLC. All rights reserved.
Last Revised: 22 June 2002. Questions or comments regarding this Web
site? Send us your e-mail.